Possible Malfunctions - Bartscher 2Z 126FL Manual De Uso

Exhaust hole/fan
o The cooling efficiency may be reduced due to accumulation of dust or other
contaminants blocking the exhaust holes. If necessary, clean the exhaust holes with
the vacuum cleaner.
Condensate tank/drip tray (K)
o Condensate should be periodically
removed with use of sponge. That tank
is located in the back of the device, on
the right side.
Manual thawing
o The device should be thawed at least every 6 months. When the device door is
often opened thawing should be performed more frequently. Turn the device off
and remove the plug from the socket. Then start the manual thawing. Pay attention
to the drip tray (K) filling and remove water.

7. Possible Malfunctions

In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Failure
The wine cooler is not
working.
The cooling efficiency is
insufficient or the device is
not reaching the preset
temperature.
- 38 -
Possible cause/solutions
- The plug is not connected to the socket or incorrect
network voltage.
- Damaged or blown fuse.
- Check temperature settings.
- The ambient conditions may require other settings.
- The door is opened too often.
- The door is not completely closed.
- The door seal does not assure sufficient sealing.
- The wine cooler does not have sufficient distance
to other objects.
- Thaw the device.