Panasonic GP-VD151 Instrucciones De Uso página 16

White balance adjustment
5
Press the [] or [] button to bring the cursor
to "AWB Mode".
6
Press the [] button.
"AWB Mode" starts blinking.
7
Press the [] or [] button to change the AWB
mode to be used to "AWB A" or "AWB B", and
press the [] button to enter the selection.
8
Press the [MENU] button for at least
2 seconds.
The menu display is exited.
9
Press the [SET] button for at least 2 seconds.
The auto white balance adjustment (AWB) is performed,
and the white balance setting is entered.
w p When the white balance adjustment is completed
successfully, "AWB OK" appears in the center of the
screen.
A WB O K
w p When the adjustment has failed, an error message
such as "OUT RANGE NG", "HIGH LIGHT NG",
"LOW LIGHT NG" or "ATW NG" is displayed.
Notes
w p ON must be selected as the OSD Status setting in
order for messages to be displayed.
[Top Menu]>[System]>[OSD Status] on [Other 2/2]
w p White balance may not be correctly set if the lighting
of the object is too weak.
w p Since the unit has a built-in memory, the set white
balance will remain in the memory even if power is
turned off. Therefore, it is not necessary to reset the
white balance if the color temperature of those objects
remains unchanged. However, it must be reset if the
color temperature changes, such as when you move
from indoors to outside, or vice versa.
q Auto tracking white adjustment (ATW)
w
When the white balance adjustment is set to "ATW", the
white balance continues to be adjusted automatically all
the time, and it is automatically corrected even when the
light source or color temperature has changed to produce
completely natural pictures.
This function works when "ATW" is selected instead of
"AWB A" or "AWB B" by following the steps for "Automatic
adjustment" in "White balance adjustment" (page 14).
Notes
w p ATW might not function properly when high brightness
light (ex. fluorescent lamp) beams into a screen.
w p White balance may not be accurately set if there is no
white object in the scene being shot.
w p The white balance may shift out of adjustment when
a different kind of light source such as sunlight or
fluorescent lighting applies.
15 (E)