Special Message Section; Environmental Issues; Name Plate Location - Steinberg MR 816csx Manual Del Usario

Ocultar thumbs Ver también para MR 816csx:
Tabla de contenido

Publicidad

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Steinberg/Yamaha.
WARNING:
Do not place this product in a position where anyone
could walk on, trip over, or roll anything over power or connecting
cords of any kind. The use of an extension cord is not recom-
mended! If you must use an extension cord, the minimum wire size
for a 25' cord (or less) is 18 AWG. NOTE: The smaller the AWG num-
ber, the larger the current handling capacity. For longer extension
cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Steinberg/Yamaha. If a
cart, etc., is used, please observe all safety markings and instruc-
tions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Steinberg/Yamaha reserves the right
to change or modify any of the specifications without notice or obli-
gation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Steinberg/Yamaha products may have benches and / or
accessory mounting fixtures that are either supplied with the product
or as optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches are
stable and any optional fixtures (where applicable) are well secured
BEFORE using.
Benches supplied by Steinberg/Yamaha are designed for seating
only. No other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how
a function or effect works (when the unit is operating as designed)
are not covered by the manufacturer's warranty, and are therefore
the owners responsibility. Please study this manual carefully and
consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Steinberg/Yamaha strives to produce products that are both user
safe and environmentally friendly. We sincerely believe that our prod-
ucts and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
92-BP
(others)
PLEASE KEEP THIS MANUAL
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of
battery is approximately five years. When replacement becomes
necessary, contact a qualified service representative to perform the
replacement.
This product may also use "household" type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended for
the battery being charged.
When installing batteries, do not mix batteries with new, or with bat-
teries of a different type. Batteries MUST be installed correctly. Mis-
matches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly and
as regulated by the laws in your area. Note: Check with any retailer
of household type batteries in your area for battery disposal informa-
tion.
Disposal Notice:
Should this product become damaged beyond repair, or for some
reason its useful life is considered to be at an end, please observe
all local, state, and federal regulations that relate to the disposal of
products that contain lead, batteries, plastics, etc. If your dealer is
unable to assist you, please contact Steinberg/Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the top panel of the product. The name
plate lists the product's model number, power requirements, and
other information. The serial number is located on the rear panel.
Please record the model number, serial number, and date of pur-
chase in the spaces provided below, and keep this manual as a per-
manent record of your purchase.
Model
Serial No.
Purchase Date

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mr 816x

Tabla de contenido