Emergency Button; Radio Antenna; Information For Users - EdilKamin NANCY Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para NANCY:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Before enabling the system, you need to load a sac of pellets into the tan and use the stove until the loaded
fuel has run out. his allows for a short system road test.
After this, the tan can be lled completely and the stove started up.
hen running, at the time at which a whole
"Reserve" ashing.
At this point, after having poured in a sac of pellets, you need to inform' the memory that you have loaded
o do so, proceed as follows:
. press the " " ey (for approximately - seconds) until the word "Cloc " appears.
. press the " " ey until the word "Reserve" appears.
. press the " " ey until the following screen appears,
g remaining in tan
then use the " " ey to ta e the gure ( ) to the value equal to the g of pellets loaded (
. press the " " ey to con rm
. press the ey
After having completed the above procedure, after having consumed the
ashing at intervals. After which the operation must be repeated, from point to point .

EMERGENCY BUTTON

Should the remote control be bro en, the basic functions can also be accessed by means of a red emergency button
located under the external hatch, on the left (see g. ).
o press the button once or more to enable the function desired:
. A S O E OFF
by pressing the red button for seconds this turns on.
. A S O E ON
by pressing the red button for seconds this turns off.
. A S O E ON
manual mode, by pressing the red button, you go from
. A S O E ON
automatic mode, by pressing the red button, you go from

RADIO ANTENNA

Stove dialogues with the remote control by means of radio waves. he radio signal is received by the radio control by means of a
small antenna beneath the external hatch (see g. ).
In accordance with Art.
/9 /EC and
/ 8/EC, pertaining to the reduction of hazardous substances used in electrical and electronic equipment,
as well as disposal of waste". he crossed-out wheeled bin symbol shown on the equipment or on the pac aging indicates that
the product must be disposed of separately at the end of its useful life. herefore, at the end of the equipment's useful life, the
user must hand in the equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer
when a new, equivalent appliance is purchased in a ratio of one to one.
INSTRUCTIONS FOR USE
g sac of pellets can be loaded, the display will show the word
to exit.

INFORMATION FOR USERS

of the Legislative Decree No.
g, the wording "Reserve" will appear
to
.
C to
C.
, dated
uly
, "Implementation of Directives:
- 34
-
g.
g caricati
g in the above example).
emergency button
g.
/9 /EC,

Publicidad

Tabla de contenido
loading

Tabla de contenido