3
•
DAILY CARE OF YOUR APPLIANCE
❐
IGNITERS AND INJECTORS:
If the igniters become dirty
them with a small, stiff (non-metallic)
brush (3.1.1).
The gas injectors are located in the
centre of each burner in the well shape.
Ensure that you do not block them during
cleaning, which could impair your hob's
performance.
If you do block them, use a safety pin to
unblock the injector
❐
PAN HOLDERS AND GAS BURNERS:
For persistent stains, use a non-abrasive
cream, and then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
Do not allow acid liquids such as lemon
juice, vinegar, etc. to remain on the
enamel
❐
ENAMEL OR STAINLESS STEEL:
Use a scouring cream to clean the hob's
enamel. Shine using a dry cloth.
Do not allow acid liquids such as lemon
juice, vinegar, etc. to remain on the
enamel
To clean the hob's stainless steel, use a
sponge
and
soapy
commercially available stainless steel
cleaner.
A
, clean
A
(3.1.2).
water
or
Your hob will be easier to maintain if
done prior to complete cooling. Turn
off all electrical and gas controls.
Preferably clean hob components by
hand rather than in the dishwasher,
• do not use scourers to clean your hob,
• do not use steam cleaners.
a
29