Abicor Binzel WH Instructivo De Servicio página 16

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional Description
5.1 Installing the alignment jig
5.1.1 Versions
EN - 2
EN-3 6 Operation
EN-3 6.1 Quick Control
6.1.1 Check the alignment.
EN-3 6.2 Adjusting the Bending Angle
EN-3
EN-3 7 Maintenance and cleaning
EN-3 7.1 Monthly
EN-4
8 Troubleshooting
EN-4
EN-4 9 Disassembly
EN-5
EN-5 10 Disposal
EN-5 10.1 Materials
10.2 Consumables
EN-5 10.3 Packaging
EN-6
EN-6
EN-6
EN-7
EN-11
Alignment Jig
EN-12
EN-12
EN-12
EN-13
EN-14
EN-14
EN-14
EN-14
EN-14
EN-14
EN-14
EN-14
BAL.0022 • 2019-04-23