Nameplate; Signs And Symbols Used En; Scope Of Delivery - Abicor Binzel WH Instructivo De Servicio

Alignment jig
3.2 Abbreviations
ROBO VTS
®
ABIROB W
®
ABIROB A
®
ABIROB GC
WH torches
ABITIG-WH
Tab. 3 Abbreviations

3.3 Nameplate

The alignment jig is marked on the base plate with the ID number.
When making any inquiries, please remember the following information:
• ID number
3.4 Signs and symbols used
In the operating instructions, the following signs and symbols are used:
Symbol Description
• List of symbols for action commands and enumerations

Cross reference symbol refers to detailed, supplementary or further information
1 Action(s) described in the text to be carried out in succession

4 Scope of delivery

• Torch-specific Alignment jig
• Adjusting lever
Tab. 4 Scope of delivery
NOTICE
• The Alignment jig is delivered to match the corresponding neck change torch with a clamping and guide device as
well as measuring and setting sleeves and adapter.
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current catalogue. Contact details
for advice and orders can be found online at www.binzel-abicor.com.
BAL.0022 • 2019-04-23
MIG/MAG welding torch system VTS-Interlock
MIG/MAG welding torch system W
Automatic welding torch, air-cooled
Automatic welding torch
Neck change welding torch
TIG neck change welding torch
• Measuring and setting sleeves
• Operating instructions
4 Scope of delivery
EN - 5