Connect Inlet Hoses - Midea MLE52S7AGS Manual Del Propietario & Instrucciones De Instalación

CONNECT INLET HOSES

H o t w a t e r
If possible install the "Y" connector directly, thread the short extension
hose on to the COLD water supply and snug it by hand; then tighten
it another
extension hose and snug it by hand; then tighten it another
pliers.
Connect the COLD inlet hose for the washer to the "Y" connector and
snug it by hand; then tighten it another
Connect the straight end of a long hose to the other outlet on the "Y"
connector and snug it by hand. Connect the hose's 90° coupling to the
brass water inlet on the back of the dryer and snug it by hand. Tighten
each connection of the dryer inlet hose another
on the water and check for leaks at all connections.
28
Co l d w a t e r
CO L D W AT ER S U P P L Y
H O S E T O W AS H ER
2/3
turn with pliers. Thread the "Y" connector to the short
Co n n e c t d i r e c t l y o r u s e e x t e n s i o n
h o s e w i t h Y c o n n e c t o r
W a t e r I n l e t
2/3
turn with pliers.
2/3
turn with pliers. Turn
2/3
turn with