Troubleshooting; Check These Solutions If Your Dryer - Midea MLE52S7AGS Manual Del Propietario & Instrucciones De Instalación

TROUBLESHOOTING

CHECK THESE SOLUTIONS IF YOUR DRYER...

If your dryer has any problems as followings, you can check as the
solutions listed below before making a service call. This will help you save
time and money.
Problem Solution
•
The unit
doesn't start.
•
•
•
•
The unit
doesn't heat.
•
•
•
•
•
Doesn't dry.
•
•
•
•
•
•
•
•
The unit is
noisy.
•
•
•
Make sure the door is latched shut.
Be sure the power cord is plugged into a live
electrical outlet.
Check the home's circuit breaker and fuses.
Press the Start/Pause button again if the door is
opened during the cycle.
Check the home's circuit breaker and fuses.
Select a heat setting other than Air fluff and the
Temp selection is not on "No heat"
On a gas dryer, check that the gas supply is on.
Clean the lint filter and exhaust duct.
Dryer may have moved into the cool-down process
of the cycle.
Check all of the above, plus...
Be sure the exhaust hood outside the home can
open and close freely.
Check exhaust system for lint buildup. Ducting
should be inspected and cleaned annually.
Use a 4" rigid metal exhaust duct.
Do not overload. 1 wash load = 1 dry load.
Sort heavy items from lightweight items.
Large, bulky items like blankets or comforters may
require repositioning to ensure even drying.
Load may be too small to tumble properly. Add a
few towels.
Check the load for objects such as coins, loose
buttons, nails, broken zips, etc. Remove promptly.
It is normal to hear the dryer gas valve or heating
element cycle on and off during the drying cycle.
Be sure the dryer is leveled properly as outlined in
the installation instruction.
It is normal for the dryer to hum due to the high
velocity of air moving through the dryer drum and
exhaust system.
41