Navigating through the menu
Main menu list
Setting and display
items
Vane•Louver•Vent.
(Lossnay)
High power
Timer
On/Off
timer
Auto-Off
timer
Weekly timer
OU silent mode
Restriction Temp.
range
Operation
lock
Energy
Auto
saving
return
Schedule Set the start/stop times to operate the units in the energy-save
16
Use to set the vane angle.
•Select a desired vane setting from fi ve different settings.
Use to turn ON/OFF the louver.
•Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
•Select a desired setting from "Off," "Low," and "High."
Use to reach the comfortable room temperature quickly.
•Units can be operated in the High-power mode for up to 30
minutes.
Use to set the operation On/Off times.
•Time can be set in 5-minute increments.
* Clock setting is required.
Use to set the Auto-Off time.
•Time can be set to a value from 30 to 240 in 10-minute increments.
Use to set the weekly operation On/Off times.
•Up to eight operation patterns can be set for each day.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
Use to set the time periods in which priority is given to quiet
operation of outdoor units over temperature control. Set the
Start/Stop times for each day of the week.
•Select the desired silent level from "Normal," "Middle," and "Quiet."
* Clock setting is required.
Use to restrict the preset temperature range.
•Different temperature ranges can be set for different operation
modes.
Use to lock selected functions.
•The locked functions cannot be operated.
Use to get the units to operate at the preset temperature after
performing energy-save operation for a specifi ed time period.
•Time can be set to a value from 30 and 120 in 10-minute
increments.
* This function will not be valid when the preset temperature ranges
are restricted.
mode for each day of the week, and set the energy-saving rate.
•Up to four energy-save operation patterns can be set for each day.
•Time can be set in 5-minute increments.
•Energy-saving rate can be set to a value from 0% and 50 to 90% in
10% increments.
* Clock setting is required.
Setting details
Reference
page
20
22
24
26
28
30
32
34
36
38