Parker Pneudri Maxi Manual De Instrucciones página 11

3.4 Customer Configuration Item Explanations
#9 ABV over-ride*
#10 ABV on stop*
#11 Fault relay on stop -
#12 Password enable -
#13 Remote communication -
3.5 Changing Selectable Parameters
Example to change pressure units to MPa from bar
5
2 - the operator can change the operational status of the ABV from CLOSED
(0) to OPEN (1).
2 - the operator can select whether the ABV opens (1) or remains closed (0)
when the STOP
the operator can select whether the fault relay de-energises (0) or
remains energised (1) when the STOP
the operator can select whether page 5 is password protected (1) or has
open access (0) to the casual user. Refer to section 3.6 - Entering Page
5 Password
In the event of dryer being controlled from a remote location (1) the user
can bring it under local control (0) for safe working.
#1
#2
key is pressed.
barg
9
key is pressed.
MPA
PSI
bar