Storing Data; Recalling Data - GERATHERM GT-868UF Manual De Instrucciones

Operations
Irregular Heartbeat Detector
If the symbol
an irregular pulse during measurement. If the symbol ap-
pears regularly please consult a qualifi ed doctor for pro-
fessional advice.

Storing data

After each blood pressure measurement, the blood pres-
sure values, pulse rate, time and date will be automati-
cally stored. Each of the three memory stores saves the
latest 30 measurements. If more than 30 measurements
EN
are saved, the memory will automatically delete the earli-
est values.

Recalling data:

1. Press the "MEMORY" button. A particular memory
store will appear on the display.
2. Press the "SET" to fi nd the correct memory store.
3. Press the "MEMORY". The average value of the last
three measurements is shown by the following symbol:
. If no values have been stored, nothing will appear
on the display. The most recently measured value will
be displayed fi rst.
4. By pressing the "MEMORY" button again you can
view each of the saved values in the selected memory
store.
5. After viewing the saved measurements, press "MEMO-
RY" again to switch back to the initial display.
6. You can also switch back to the initial display by press-
ing the "START/STOP" button.
appears, it means the unit has detected
36