Erasing Pictures - Olympus Camedia D-340R Manual Del Usuario

YES OK 3
NO
126
OK
3
OK
E

ERASING PICTURES

You can delete pictures you do not want.
When the picture is protected or the write-protect adhesive
seal is placed on the card, the camera does not enter the
Erase mode. Either cancel the protection or remove the seal
in order to start erasing. (Do not use the seal again.)
One-Frame Erase
This function works when the lens barrier is closed.
1
Display the picture you want to erase.
2
Press the Erase mode button until the One-Frame Erase
indicator in the upper right corner of the LCD monitor
lights.
To cancel, press the Erase mode button again.
3
Press the OK (Shutter Release) button to erase the
selected picture.
The camera makes a short single beep and the selected
picture is erased.
Caution:
Never open the card cover, eject the card,
remove the batteries, or pull the plug while
erasing pictures. It may destroy the data in the
card.
Do not press the Erase mode button while an
image is being loaded onto the LCD.