154
E
USING A PERSONAL COMPUTER
Make sure that the power of the computer and the camera
are turned off and the lens barrier of the camera is closed
before connecting.
1
Connect the communication cable to the computer's serial
cable as shown on the page 152.
2
Open the connector cover.
3
Align the arrow mark on the communication cable plug
with the camera's connector. Insert the plug and push it in
as far as it will go.
4
Open the lens barrier to turn on the power.
Note:
When the lens barrier is closed, the computer will
not communicate with the camera.
AC adapter is recommended for computer
downloads.