Adjusting The Date And Time - Olympus Camedia D-340R Manual Del Usuario

'98 10 25
11 : 23
OK
SET NO
66
OK
OK
SET NO
'98 11 23
12 : 35
OK
OK
SET NO
E

ADJUSTING THE DATE AND TIME

When adjusting from the camera.
Operate with the lens barrier closed.
1
Press the Previous (–) button and the LCD monitor
ON/OFF button at the same time to turn on the monitor.
2
The screen is set to the Date-Print selection mode. Decide
whether to print the date with the Previous (–)/Next (+)
button, then press the OK (shutter) button.
Press the Erase mode button to go to the date-input screen
without setting the Date-Print.
Press the LCD monitor ON/OFF button to cancel the
setting and turn off the LCD monitor.
Date-Print is possible only when printing directly from the
P-300 printer.
3
Enter the number for the year with the Previous (–)/Next
(+) button, then press the OK (shutter) button. When the
minutes have been entered, press the OK button to
complete the date setting and turn off the LCD monitor.
Press the Erase mode button or the LCD monitor ON/OFF
button before completing the setting to cancel it and turn off
the LCD monitor.
Read the Note on page 68.