Tabla de contenido
Publicidad
78
E
Taking pictures using the LCD monitor
1
Open the lens barrier. Press the LCD monitor ON/OFF
button to turn on the LCD monitor.
Press the button again to turn off the monitor.
2
Aim the camera by looking at the subject through the LCD
monitor.
Take the picture in the same way as you would when using
the optical viewfinder. (p. 74)
Note:
Pictures that appear on the LCD monitor are for
composition purposes only. If you need to know
focus or exposure, check your computer's
display.
It is recommended to use the optical viewfinder
for less camera movement and battery
consumption, as well as shorter recording time.
When the subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
LCD monitor. This is not a malfunction; it will be
less noticeable in the Record mode.
When a picture is taken in a lighted area, such as
in sunlight, vertical lines may appear on the LCD
monitor. This is not a malfunction.
Publicidad
Tabla de contenido
