Technical Data; Angle Grinder; Before Use - Hilti AG 500-A22 Manual De Instrucciones Original

Item Equipment
I Kwik lock (optional
for G)
J Guard type 27

5 Technical data

5.1 Angle grinder

Rated voltage
Rated speed
Maximum disc diameter
Maximum disc diameter
Weight
Thread diameter

6 Before use

6.1 Inserting the battery
CAUTION
Risk of injury. Due to the angle grinder starting unintentionally.
▶ Before fitting the battery, check that the angle grinder is switched off and that the safety lock is
activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
angle grinder are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby
presenting a hazard to other persons.
▶ Fit the battery and check that the battery is securely seated in the power tool.
6.2 Removing the battery
▶ Remove the battery.
6.3 Fitting the side handle
▶ Screw the side handle into one of the threaded bushings provided.
6.4 Fitting or removing the guard
CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶ Wear protective gloves when fitting, removing or adjusting the accessory tool or other parts and
when troubleshooting.
8
Printed: 26.01.2017 | Doc-Nr: PUB / 5292877 / 000 / 01 Printed: 26.01.2017 | Doc-Nr: PUB / 5292877 / 000 / 00
AC­D AG-D AF-D
X X X
— — —
5
6
AN-D DG- DC-TP,
CW DC-D
(SPX, (SPX,
SP, P) SP, P)
X ­
— —
AG 500­A22
21.6 V
9,500 /min
5 in
125 mm
6.0 lb
(2.7 kg)
5/8"-11
3CS, AG-D
3SS, type 27
4CS,
4SS
X — —
— — X