Technical Data - Hilti AG 5D-22 Manual De Instrucciones Original

Type
Abrasive resin-fiber wheel
Suitability of wheels for the equipment used
Item Equipment
A Guard
B Front cover (in
combination with
A)
C Dust hood (grinding)
DG­EX 125⁄5"
D Dust hood (cutting)
DC­EX 125⁄5"C (in
combination with A)
E Side handle
F Clamping nut
G Clamping flange
H Kwik lock (optional
instead of H)
I Clamping nut for
abrasive resin-fiber
wheel
J Support plate
5

Technical data

Rated voltage
Rated speed
Maximum wheel diameter
Weight in accordance with EPTA Procedure 01, without battery
Thread diameter
Spindle length
Ambient temperature for operation
Storage temperature
5.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
*2272032*
Application
Rough grinding
AC­D AG­D,
AF­D,
AN­D
X X
X —
— —
— —
X X
X X
X X
X X
— —
— —
2272032
Designation
AP-D
DG-CW DC-TP,
(SPX, SP, DC-D
P) (SPX, SP,
P)
X X
— X
X —
— X
X X
X X
X X
— X
— —
— —
Material
Metal
AP-D 3CS, 4CS,
3SS, 4SS,
DD-M14
X X
— —
— —
— —
X X
— —
— —
— —
X —
X —
21.6 V
9,000 /min
125 mm
2.1 kg
M14
22 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English 11