Appendix B - Uim Indicator Light Status; Appendix C - Uim Button Operation - Motorola T603 Guia Del Usuario

Appendix B — UIM Indicator Light
Status
The indicator light on the UIM provides status
information.
Light Status
Off power off
Blue (three power on
flashes)
Blue pairing (discoverable) mode
(continuous
flashing)
Short purple pairing successful
flash, then
steady blue
Red and blue searching mode
(flashing)
Appendix C — UIM Button Operation
There are five buttons on the UIM whose functions
vary depending on how they are pressed.
Multi-function (MFB)
button
red (END)
button
green (SEND)
button
Appendix C — UIM Button Operation
24
Light
Red (steady)
Blue (steady)
Blue
(quick flash)
Blue
(long flash)
Purple
(long flash)
Red
(flashing)
Appendix B — UIM Indicator Light Status
You can perform three types of actions with each UIM
button:
• Short press (or "press and release")
• Long press (or "press and hold for 2 to
blue (UP ARROW)
button
• Extended press (or "press and hold for
blue (DOWN ARROW)
button
The function of each button changes depending on
what operating mode the car kit is in.
Status
idle (not connected to device)
standby (connected to phone in
Connected mode)
incoming call
on a call
on a call (muted)
no service
6 seconds")
6 seconds or longer")
23