Disconnecting The Car Kit From Your Bluetooth Device - Motorola T603 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

disconnecting the car kit
from your Bluetooth
device
The Bluetooth connection between the car kit and
Bluetooth device is automatically disconnected when
you turn off the vehicle. When the vehicle is powered
down, the call is seamlessly transferred to the phone.
To do this...
Do this...
Remove all
Press and hold red (END) button for
paired
6 seconds or longer while not in
devices from
a call.
the car kit's
Once a device has been removed
history list
from the car kit's history list, it
must be re-paired again before it
can be used. See "initial pairing" on
page 12 for instructions on pairing.
using your car kit
18
To do this...
Do this...
Manually
Press and hold red (END) button for
disconnect
2-6 seconds while not in a call.
the car kit
This disconnects the last
from your
connected device, and the car kit
device
begins searching for the next
available device in its history list.
If there are no other devices
available, the car kit continues to
look for any previously paired
device.
If you desire to reconnect the
device that was just disconnected,
you must initiate the Bluetooth
connection from the device.
See your device's instruction
manual for details.
using your car kit
17

Publicidad

Tabla de contenido
loading

Tabla de contenido