Intended Use - Hilti SBT 4-A22 Manual De Instrucciones Original

▶ Always hold the power tool with both hands on the grips provided. Keep
the grips clean and dry.
▶ Hold the power tool by the insulated gripping surfaces when performing
work in which the accessory tool might come into contact with concealed
wiring. If the accessory tool comes into contact with a live wire, metal
parts of the power tool can also become live, resulting in an electric
shock.
▶ Do not touch rotating parts – risk of injury!
▶ Wear protective gloves also when changing the accessory tool. Touching
the accessory tool presents a risk of injury (cuts or burns).
▶ Before beginning the work, check the hazard classification of the dust
that will be produced. Wear respiratory protection of a type suitable for
the dust you are exposed to and use an industrial vacuum cleaner with
an officially approved protection classification in accordance with locally
applicable dust protection regulations.
▶ Take breaks and exercise your fingers to improve the blood circulation.
Exposure to vibration during long periods of work can lead to disorders
of the blood vessels and nervous system in the fingers, hands and wrists.
▶ Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool
can become live, presenting a risk of electric shock, if you accidentally
damage an electric cable.
▶ Switch the power tool off if the accessory tool sticks and stalls. The power
tool may be deflected laterally.
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Product overview
Side handle
@
Keyless chuck
;
Function setting ring
=
Gear selector switch
%
Forward/reverse selector
&
switch with safety lock
Control switch (with electronic
(
speed control)

3.2 Intended use

The product described is a hand-held cordless drill/driver. It is designed for
driving and removing screws and for drilling in steel, wood and plastic.
▶ Use only Hilti Li-ion batteries of the B18 / B22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
6 English
1
)
+
§
/
:
Grip
Release buttons with addi-
tional function (state of charge
display activation)
Rating plate
Belt hook (optional)
State of charge and fault dis-
play (Li-ion battery)
2184702
*2184702*