Worx WG720 Instrucciones De Seguridad página 12

SYMBOLS
Wear ear protection
CPSC Danger label
KEEP HANDS AND FEET AW AY
GARDER MAINS ET PIEDS À DI S TANCE
Severing of toes or fingers-Rotary
mower blade
Thrown objects from mower deck
Keep bystanders/children away
Safety alert
Slip on slope
12
Read the operator's manual
Double insulation
Blade continues to rotate after the
machine is switched off. Wait until all
machine components have completely
stopped before touching them.
Wear protective gloves.
Before any work on the machine itself,
pull the power plug from the outlet.
12AMP Electric Lawn Mower
ASSEMBLY & OPERATION
ACTION
ASSEMBLE
Assembling the handle bar
Adjustment Handle's height
Assembling the grass collection
bag
Assembling the grass collection
bag to the lawn mower
Removing/emptying the grass
collection bag
Installing side-discharge chute
Installing mulching plug
OPERATION
Starting
Stopping
Adjusting the cutting height
STORAGE
MULCHING MOWING TIPS
While mulching, your new mower is designed to cut
the grass clippings into small pieces and distribute
them back into the lawn. Under normal conditions,
the mulched grasses will biodegrade quickly to
provide nutrients to the lawn.
Please review the following recommendations for
optimum mulching performance.
1. Avoid mowing when the grass is wet from rain or
dew. Wet grass may form clumps which interfere
with the mulching action and reduce runtime.
The best time to mow grass is in the late
afternoon when the grass is dry and the newly
cut area will not be exposed to direct sunlight.
2. For best mulching performance, set the cutting
height to remove about one third of the grass
blade length, ideally no more than 1-1/2 in. at
one time. If the lawn is overgrown, it may be
necessary to increase the cut height to reduce
the pushing effort and prevent overloading
the motor. For extremely heavy mulching, it is
advisable to first cut at a high cut height setting,
and then re-cut to the final cut height. Otherwise,
make narrower cuts and mow slowly.
3. For best performance, keep the mower housing
free of built-up grass. From time to time turn
off mower and wait for the blade to come to a
complete stop. Using an object such as a stick,
FIGURE
See Fig. A1
See Fig. A2
See Fig. B
See Fig. C1,
C2, C3
See Fig. C4
See Fig. D1, D2
See Fig. E1, E2
See Fig. F1, F2
See Fig. F3
See Fig. G
See Fig. H1, H2
EN