Control Board Connection (Optional) - Abicor Binzel PP Instructivo De Servicio

PP

4.5.1 Control board connection (optional)

1
1 Feed unit
2 Control board
Fig. 5 Connection diagram
1 = Motor (+)
2 = Motor (-)
3 = Pot. min.
4 = Pot. max.
5 = Pot. max.
Tab. 6 Colour coding
Operating voltage 36 - 42 V AC
The control board guarantees a synchronous run between the push motor in the feed case and
the pull motor in the manual torch. The green/white two-wire motor line must be connected in
accordance with the following connection diagram:
 Fig. 5 on page EN-11
Green to plus, white to minus:
BAL.0212.0 • 2018-07-16
5 4
3 Torch trigger control lead
4 Push motor line
2
1/2 3/4/5
3
5
Green (GN)
White (WH)
White (WH)
Brown (BN)
Green (GN)
4 Putting into operation
Feed motor control
EN - 11