Torch Handle Control Elements; Trigger Up/Down Function - Abicor Binzel ABIPLAS WELD 100 Instructivo De Servicio

6 Putting into operation

6.2 Torch handle control elements

6.2.1 Trigger up/down function

EN - 14
NOTICE
®
• The ABIPLAS WELD welding torch must only be operated by
qualified personnel (in Germany, see TRBS 1203).
• Please consult the operating instructions for the welding components,
welding power source and welding torch.
On the standard welding torch, the trigger can be used to activate an up/down
mode. Further operating modes and torch handle modules depend on the
welding power source and must be ordered separately.
1
1
Trigger 1
Fig. 5 Trigger function
1 Push trigger 1 forwards = start welding
2 Push trigger 1 forwards again = stop welding
Other functions during operation:
• Push trigger 1 backwards = access secondary current
• Push trigger 2 forwards = welding current up
• Push trigger 2 backwards = welding current down
®
ABIPLAS WELD 100/150 POWDER W
2
Trigger 2
BAL.0086 • 2020-12-17
2