Setting The Sound - Vetus SENSORD Manual De Manejo Y Instrucciones De Instalación

2.4.2 Setting the units
• Go to 'Display settings' via the Configu-
ration menu and
Configuration menu
Tank
Fresh water tank
Display settings
Exit
• Press the
Display settings
Language
Volume unit
Depth unit
Contrast
Sound
Brightness
Lighting mode
Exit
• Select 'Volume unit'
,
• Use the
from:
- 'litre',
- 'Imperial Gallon' and
- 'US Gallon'.
• Press the
• Select 'Height unit'
,
• Use the
from:
- 'cm' and
- 'in' (inch).
• Press the
32
090430.01
.
Dieseltank
key.
English
Litre
cm
50
On
100
Automatic
key to select the units
key to confirm.
key to select the units
key to confirm.
2.4.3 Setting the contrast in the dis-
play
Setting: 0: minimum
100: maximum
• Go to menu 'Display settings',
see 2.4.2.
Select 'Contrast' and press the
key.
• Use the
from:
• Press the

2.4.4 Setting the sound

Setting:
Alarm: only an acoustic alarm when the
level is too high or too low.
Keys: only a beep when a key is
pressed.
On: acoustic alarm when the level is
too high or too low, and when
pressing a key.
Off: no sound.
• Go to menu 'Display settings', see
2.4.2.
Select 'Sound' and press the
key.
Ultrasonic tank management system
/ keys to select
0
25
50
75
100
key to confirm.