How Do I Load Paper In The Input Tray - HP Designjet 130 Serie Guía De Referencia Rápida

HP Designjet 130/130nr Printer - Quick Reference Guide

How Do I Load Paper in the Input Tray?

1. Remove the tray from the printer.
2. Remove the dust cover from the tray. Adjust the size of the tray if necessary. If
the paper you are using is larger than Legal- or A4-size, extend the tray. For
Legal- and A4-size or smaller paper, use the tray in its normal size. To adjust
the size of the tray, slide the tray extension locking tab to the left until it
clicks. This unlocks the tray extension. To lengthen the tray, pull the tray
extension out as far as it will go. To make the tray shorter, push the tray
extension in as far as it will go. The tray extension locking tab will click back
to its normal position, locking the tray size.
3. Place the paper in the tray, to the right and towards the printer.
6