away from the tubing through the metal D-ring in order to form
the inside of the cuff loop.
End of cuff
D-ring
2. Plug the cuff tube into the left side of the unit.
Insert connector here
18
3. Open the arm cuff so that your arm may be
placed through it.
left arm so that the cuff can be wrapped
inches (2-3 cm) above elbow.
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
the cuff is at the same height as your heart.
Make sure the tube is not kinked.
19