Installing Batteries; Using The Ac Adapter - Walgreens PREMIUM ARM Manual De Instrucciones

Ocultar thumbs Ver también para PREMIUM ARM:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING BATTERIES

Press down on latch and lift
the battery cover to open the
battery compartment.
2. Install or replace 4 "AA " sized
alkaline batteries in the battery
compartment according to
the indications inside the
compartment.
3. Close the battery cover by
pushing in the top end of the
battery door.
Replace the batteries if:
screen.
Note:
replaced.
earlier than batteries you buy in stores.
of time.
soft dry cloth each time you install batteries.
with the household garbage.
Battery
Cover
12

USING THE AC ADAPTER

Connect the AC adapter with the AC adapter jack as shown
below.
2. Please use only the AC adapter included with this monitor.
Note:
Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
the adapter plug can be easily removed from the unit.
Please unload the batteries when operating with an AC
in the compartment for a long time may cause leakage,
which may lead to damage to the unit.
adapter.
Triple Check
Rest Assure
ON
OFF
AM/PM
ON
OFF
Connect AC
adapter here
AC Adapter
13

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido