Description; Block Diagram Of The Device; Technical Data - tormatic DTS T1E Instrucciones Para La Instalación

1. DESCRIPTION

Device with TORMATIC microprocessor designed to drive 2 motors with a maximum
power of 300 Watt each.

1.1 BLOCK DIAGRAM OF THE DEVICE

DL1 Mains presence LED
DL2 Start LED
DL3 Stop LED
K1 Power terminal board
K2 Signal terminal board
K3 Connector for decoding badge reader and coded keypad or Radio receiver socket
for TORMATIC models only.
N.B. Plug in the receiver as shown on the printed circuit.
K4 Earth connection for the device
J1 ADD/ON anti-crush card (SAFETY CARD)
SW1 10 way dip switch

1.2 TECHNICAL DATA

Voltage 230 VAC (+6% - 10%)
Frequency 50HZ
Fuse protection F1 F5A motor protection quick-acting fuse
Fuse protection F2 F200mA transformer primary circuit quick-acting fuse
Fuse protection F3 F2A electric lock quick-acting fuse
Fuse protection F4 F500mA 24V accessories quick-acting fuse
Device stand-by consumption 15W
Device max. consumption 680W
Operating temperature -20°C +70°C
Storing temperature -40°C +85°C
Relative humidity 90% max. 90% (non-condensing)
Sealing IP55 (only for IP55 boxes)
ENGLISH
DL4 Photocell LED
DL5 Pedestrian start LED
P1
Work time trimmer
P2
Pause time trimmer
(with motors and accessories connected and functioning)
Trimmer
-
+
Trimmer adjustment
ON
OFF
Dip switch position
4