Peavey Transtube Serie Manual De Instrucciones página 10

The Rate (14) and Depth settings work together to determine the overall modulation effect.
When using the footswitch in EFX Select Mode, the Depth can be toggled between two
settings by pushing the Modulation Footswitch (28). Those two settings can represent any
position on the knob, including off. Keep in mind, both the Rate (14) and Depth are toggled
simultaneously. Refer to the MIDI/Footswitch section and the Application Notes for more
information on this feature.
DELAY
16. TAP TEMPO BUTTON/LED
The Tap Tempo button sets the delay time to match that of a certain tempo. Pressing the
button several times (at least two) in unison with the desired tempo will reset the delay
tempo. A Tempo LED is located next to the Tap Tempo Button to provide a visual
representation of the delay rate. This function can also be performed on the footswitch by
tapping the Tap Tempo Footswitch while in the EFX Select Mode. Refer to the
MIDI/Footswitch section and the Application Notes for more information on this feature.
NOTE: You can use the two tap switches (footswitch and front panel) together alternating
between foot and hand to get very short delay times. Pressing the two almost simultaneously
will produce this effect.
17. FEEDBACK
This control determines the number of repeats or the "decay time" for the delayed signal.
Turn the knob clockwise to increase the feedback setting. When using the footswitch in EFX
Select Mode, the Feedback can be toggled between two settings by pushing the Delay
Footswitch . Those two settings can represent any position on the knob. Keep in mind, both
the Level and the Feedback are toggled simultaneously. Refer to the MIDI/Footswitch section
and the Application Notes for more information on this feature.
18. LEVEL
This control determines the relative volume of the delayed signal. Turn the knob clockwise to
increase the amount of delayed signal found in your overall sound. Place this control in the
full counterclockwise position to turn the delay effect off. When using the footswitch in EFX
Select Mode, the Level can be toggled between two settings by pushing the Delay
Footswitch. Those two settings can represent any position on the knob, including off. Keep in
mind, both the Level and the Feedback are toggled simultaneously. Refer to the MIDI/
Footswitch section and the Application Notes for more information on this feature.
MASTER
19. LEVEL
Use this control to adjust the overall (global) gain of the Transformer. This control setting
is not linked in any way to a stored preset. Adjust the Level control to various playing
situations such as different room sizes or whenever an overall level change is desired.
Changes in this control setting will bring up or down all preset levels proportionally. It will not
affect the volume of the effects loop.
20. POWER DYNAMICS
This is the famous Peavey T.Dynamics found throughout the award winning TransTube
Series amplifier line. The Power Dynamics control adjusts the power level of the amplifier
from 10 percent to 100 percent power. When set to lower settings, the power compression
simulation will be much more pronounced.
10