TRANSFORMER 112 PRESET STRUCTURE
This section will describe the overall preset structure of your amplifier. Refer to the diagrams to
better understand how the presets are divided and selected on the Transformer .
First, your Transformer is shipped with 16 factory presets and 16 user presets. From Peavey, the 16
factory presets are identical to the 16 user presets (unless manually changed).
Factory Presets
The 16 factory presets are included to give you a good starting point and to illustrate some of
the Transformer's capabilities. Most users will learn from the factory presets and apply what
they have learned to the programmable, user presets. When a factory preset is altered it can
be stored to a user preset. Any change in a factory setting will be lost (if not stored as a user
preset) when the next preset is selected.
User Presets
The 16 user presets come from Peavey loaded with the same presets found in the 16 factory
presets. They can easily be "transformed" to your preference and/or saved in the same (or a
different) location. It is easy to select between the user and factory presets. Simply press
(and quickly release) the User Switch on the front panel of your Transformer to toggle
between both. The LED next to the switch will illuminate to indicate you are in the user preset
group.
The factory and user presets are each divided into 4 banks (A, B, C and D). Each bank is
divided into four individual presets. Therefore, [4 banks] x [4 presets] = 16 (or A1 thru D4).
This is demonstrated in the diagram below.
Transformer 112
Transformer 112
16 Factory
16 Factory
Presets
Presets
Transformer 112
Transformer 112
16 Factory
16 Factory
Presets
Presets
A1 through A4
A1 through A4
B1 through B4
B1 through B4
C1 through C4
C1 through C4
D1 through D4
D1 through D4
5
16 User
16 User
Presets
Presets
(same as factory)
(same as factory)
16 User
16 User
Presets
Presets
A1 through A4
A1 through A4
B1 through B4
B1 through B4
C1 through C4
C1 through C4
D1 through D4
D1 through D4