Owner's manual
STeP 1: Unscrew the mounting screw. Release
the back cover and remove the battery.
STeP 2: Insert the cards (SIM and memory) as
indicated (with the chip/pins facing downwards).
STeP 3: Install the battery. Make sure to align the
battery connectors on the battery with the pins in
the battery compartment.
STeP 4: Close the back cover. Tighten the
mounting screw.
battery/SiM card/memory card instalation
• Power off the mobile phone and disconnect
it from charger before unmounting battery or
SIM cards.
• Before removing memory card, make sure it
has been disconnected first!
• Exercise caution when operating SIM card/
memory card, as friction or bending may
damage the card.
• Keep the mobile phone and its fittings such
as the SIM cards/memory cards beyond
children's reach.
• If the memory card cannot be read, please
check whether it is has been inserted
correctly.
• Producer does not guarantee compability
with every memory card.
• Please note: Dual SIM in standby will shorten
the standby time compared to single SIM.
• Make sure the battery is fully charged if it has
been out of use for a long period.
21