Operating Elements; Before Commissioning; Operation - Tornado BR Vario II Manual De Instrucciones

1 Brushing rollers
2 Button for brush change
3 Bearing wheel
4 Strain relief clamp
5 Push handle
6 Switch for detergent solution
7 Switch for brush drive
8 Support of the transport wheel
9 Mains plug
10 Lock of pushing handle
11 Fresh water tank cover
12 Fresh water tank
13 Release button for the transport wheel

Operating elements

Before Commissioning

Installing the pushing handle
Warning
Risk of damage. Do not pinch the cable dur-
ing the installation.
Slide the lock of the push handle up.
Place the lower push handle vertically
and arrest.
Slide the upper slider half onto the lower
slider half.
Insert the screw into the star handle and
tighten it.
Attach the cable to the wire hook on the
push handle.
Installing the Brushes
The brushes must be installed before the in-
itial operation (see "Maintenance works").

Operation

Note
To take the brush drive out of operation, im-
mediately release brush drive switch.
Filling in detergents
Warning
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety and
danger of accident. Only use detergents
that are free from solvents, hydrochloric
acid and hydrofluoric acid.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
9
English