Dash Disassembly - Metra 99-5816 Instrucciones De Instalación

1. Unclip and remove the trim panel surrounding
the shifter, including the cup holders. (Figure A)
2. Remove (2) 9/32" screws from the bottom
edge of the factory radio trim panel. (Figure B)
3. Remove (2) 9/32" screws above the gauge
cluster (facing up), then unclip and remove
the trim panel surrounding the gauge cluster.
(Figure C)
4. Unclip and remove the trim panel above the
glove box. (Figure D)
Continued on the next page
99-5816

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
(Figure D)
2