Kit Preparation - Metra 99-5816 Instrucciones De Instalación

1. Secure the climate control into the radio
housing using the factory hardware.
(Figure A)
2. Secure the accessory socket panel to the
radio housing using the factory hardware.
(Figure B)
3. Clip the passenger air bag light and the
switch panel blank plates into the radio
housing. (Figure C)
4. Attach top and middle radio housing clips to
the back of the radio housing. (Figure D)
Side view Side view
(2) Top clips (4) Middle clips
Note: When the clips are properly attached
they should be on a 90 degree angle with
the radio housing.
Continue to kit assembly
99-5816

Kit Preparation

(Figure A)
(Figure B)
(Figure C)
(Figure D)
4