Kit Assembly; Din Radio Provision With Pocket - Metra 99-5816 Instrucciones De Instalación

DIN radio provision with pocket

1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing trim panel and secure by
bending the metal locking tabs
down. (Figure A).
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Snap the pocket into the radio
housing trim panel. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-5816
(Figure C)
5