McQuay E Serie Manual Del Usuario página 11

01_EN_3P257187-2A.fm Page 10 Saturday, October 31, 2009 10:02 AM
Wiring
CAUTION
• When connecting the connection wires to the terminal board using a single core wire, be sure to perform curling.
Problems with the work may cause heat and fires.
Stripping wire at terminal block
3) Pull the wire and make sure that it does not disconnect. Then fix the wire in place with a wire stop.
10
Excessive strip length
Strip wire end
may cause electrical
to this point. shock or leakage.
Good Wrong
■English