Iso Din Head Unit Provision With Pocket - Metra 99-7406 Instrucciones De Instalación

ISO DIN head unit provision
1. Mount the ISO brackets to the head unit
with the screws supplied with the unit.
(Figure A)
2. Slide the head unit into the radio
opening until the side clips engage.
(Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7406
with pocket
7
(Figure A)
(Figure B)