Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DIN head unit provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
2. Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3. Slide the aftermarket head unit into
the cage and secure. (Figure B)
4. Reassemble dash in reverse order
of disassembly using the 99-3010S
radio trim panel instead of the
factory panel.
5. Programming: You must cycle the
A/C fan speed all the way to high
and back to low when you first
install the kit.
Kit Assembly
(Figure A)
(Figure B)
99-3010S
ISO DIN head unit provision with pocket
1. Mount the ISO brackets to the head
unit with the screws supplied with
the unit. (Figure A)
2. Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3. Slide the head unit into the radio
opening until the side clips engage.
(Figure B)
4. Snap the trim plate into the
radio housing. (Figure C)
5. Reassemble dash in reverse order
of disassembly using the 99-3010S
radio trim panel instead of the
factory panel.
6. Programming: You must cycle the
A/C fan speed all the way to high
and back to low when you first
install the kit.
4
(Figure A)
(Figure B)
(Figure C)
Publicidad
Capítulos
Tabla de contenido
