Double Din Radio Provision - Metra 99-7613 Instrucciones De Instalación

1. Mount the factory brackets to the
sides of the aftermarket radio
using the screws supplied with the
radio. (Figure A)
Note: The 99-7613 brackets
can be used in place of the factory
brackets. Refer to previous page
for tab instructions.
2. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
3. Place the double DIN trim plate on
the front of the double DIN radio.
(Figure B)
4. Reassemble the dash in reverse
order of disassembly.
Kit Assembly 99-7613

Double DIN radio provision

(Figure A) (Figure B)
7