Iso Din Radio Provision With Pocket - Metra 99-7613 Instrucciones De Instalación

1. Choose the appropriate bracket
set for your application then cut
and remove the tabs not necessary
for your application.
(Figures A.1 and A.2)
2. Mount the brackets to the housing
with the supplied (4) 3/8" Phillips
screws. (Figure B)
3. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
4. Slide the aftermarket radio into
the bracket/housing assembly and
secure using the screws supplied
with the radio. (Figure B)
5. Locate the factory
wiring harness and antenna plug in
the dash. Metra recommends using
the proper mating adapters from
Metra and/or AXXESS.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly 99-7613

ISO DIN radio provision with pocket

Rogue (all)
Rogue Select
(Figure A.1)
(Figure B)
Bracket A
Versa 2007-2011
Rogue (all)
Rogue Select
(Figure A.2)
6
Bracket B
Juke
Versa 2012-2013
Versa S, Versa S+ 2014
Juke