Iso Din Head Unit Provision - Metra 99-2005 Instrucciones De Instalación

ISO DIN head unit provision

1. Mount the ISO brackets to the after-
market radio with the screws supplied
with the unit. (Figure A)
2. Slide the after-market radio unit into the
cage and secure. (Figure B)
3. Snap the Trim plate into the Radio
Housing. (Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-2005
11
(Figure A)
(Figure B)
Right side clip