Scion TC 2005-2010
1. Unsnap trim from around shifter
(not necessary to be removed).
(Figure A)
2. Unclip and remove panel from
around radio (including climate
controls and radio door). (Figure B)
3. Remove (2) 10mm nuts from
the top mounting locations and
(2) 10mm bolts from the bottom
mounting locations to remove the
radio. (Figure C)
4. Remove factory brackets from
radio. Retain brackets for use
during kit assembly.
Continue to kit assembly
(Figure A)
Dash Disassembly 95-8202
(Figure B)
(Figure C)
Scion TC 2011-up
1. Unclip and remove the radio
trim panel. (Figure A)
2. Remove (4) 10mm bolts
securing the radio. (Figure B)
3. Remove factory brackets
from radio. Retain brackets
for use during kit assembly.
Continue to kit assembly
15
(Figure A)
(Figure B)