Toyota Highlander 2001-2007
(without factory navigation)
1. Pull and remove dash panel from
radio and climate controls. Tip:
There are 8 clips. (Figure A)
2. Remove (6) 10mm bolts from radio
and climate controls assembly.
(Figure B)
3. Remove assembly and disconnect
the wiring.
4. Remove (8) Phillips bolts and
(4) Phillips screws to separate
brackets from assembly. Retain
brackets for use during kit
assembly. (Figure C)
Continue to kit assembly
(Figure C)
Dash Disassembly 95-8202
(Figure A)
(Figure B)
Toyota Matrix 2005-2008
1. Unclip the bottom edge of the radio
trim panel then lift up and out to
remove. (Figure A)
2. Remove (4) 10mm bolts securing
the factory radio. (Figure B)
Continue to kit assembly
5
(Figure A)
(Figure B)