Double Din Radio Provision - Metra 95-8202 Instrucciones De Instalación

1. Attach the factory mounting brackets and the 95-8202
double DIN trim plates to the double DIN radio with the
screws supplied with the radio. (Figure B)
Note: Remove locating pins from factory brackets
using a grinder tool.
2. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Re-connect the negative battery
terminal and test the radio for proper operation.
3. Reassemble dash in reverse order of disassembly.
Kit Assembly 95-8202

Double DIN radio provision

Style of factory brackets
may differ
(Figure A)
19