Metra 99-3033 Instrucciones De Instalación página 3

Chevrolet Caprice/Impala 1985-1990
1. Open the glove box and remove (4)
hex head screws from the door hinge.
(Figure A)
2. Remove (2) hex head screws from the
top of the glove box liner. (Figure A)
3. Remove the retainer clip from the
heater cable control lever.
4. Remove (1) hex head screw from the
tab securing the cable and disconnect.
5. Remove the ashtray cavity and (2) hex
head screws exposed in the ashtray
cavity. (Figure A)
6. Remove (2) hex head screws from
above the climate controls and pull the
support plate assembly from the dash.
7. Remove (2) hex head screws securing
the climate control cluster to the
support plate.
8. Remove (5) hex head screws securing
the climate control cluster/head unit
dummy panel assembly to the support
plate and remove the assembly.
Continue to kit assembly
Dash Disassembly 99-3033
Support
plate
Heater
control
cluster
(Figure A)
3
Radio dummy panel