Operation; Automatic Operation; Manual Operation - Winix PlasmaWave WAC-9000 Manual Del Usuario

AUTOMATIC OPERATION

The unit is set to default to Automatic
operation when it is first turned on. The
air cleaner will automatically sense the
amount of impurities in the air, and adjust
the fan speed accordingly.

MANUAL OPERATION

After you turn on the unit, you can switch
to manual operation by using the remote
control or the FUNCTION button on
the unit.
• LOW, MEDIUM, AND HIGH
These levels are recommended for
standard daytime use. HIGH will activate
automatically when sensors detect high
levels of dust or odors.
PART IS BLINKING
LOW
MEDIUM
HIGH

OPERATION

• TURBO
The TURBO level, the highest fan speed,
can be activated manually for maximum
air circulation.
TURBO
• PLASMA ON/OFF
Activate PlasmaWave
for 2-3 seconds the PLASMA ON/OFF
button on the remote, or the POWER
button on the unit. PlasmaWave
generates positive and negative ions.
• TIMER
Set the timer for 1, 4, or 8 hours by
pressing the TIMER button on the
remote or the unit. The unit will stop
operating when the set time is up.
Cancel the timer by pressing the TIMER
button until the 1-, 4-, and 8-hour
indicator light on the unit disappears.
8
by depressing
TM
TM