Operation - Winix PlasmaWave 5300 Manual De Usuario

DISPLAY PANEL 5300
1
REPLACE FILTER
2
SPEED
1 2 3 TURBO
1. REPLACE FILTER INDICATOR - The
indicator will signal when to replace the
True HEPA Filter .
2. FAN SPEED INDICATOR - Shows
current fan speed setting.
REPLACE FILTER
3. MODE (AUTO/SLEEP) - The unit is set
SPEED
to default to AUTO mode when it is first
1 2 3
turned on. The sensor will automati-
cally sense the amount of impurities in
the air, and adjust the fan speed accord-
ingly. When set on SLEEP mode, unit
will operate quietly and dim the control
panel lights.
3 5
SLEEP MODE AUTO
SPEED
4
MODE
AIR QUALITY
HIGH LOW AQ SENSOR
7
4. AIR QUALITY LEVEL - Shows current
level of air quality in your room.
5. SPEED/MODE - Change the fan speed
and modes between AUTO and SLEEP.
SLEEP MODE AUTO
6. POWER BUTTON - Turn unit on and off.
SPEED
MODE
ODOR LEVEL
7. AIR QUALITY SENSOR - Automatically
HIGH LOW ODOR SENSOR
monitors air quality level and adjusts fan
speed accordingly.
6
AUTOMATIC OPERATION
6
The unit is set to default to Automatic operation when it is first turned on. The air cleaner will
automatically sense the air quality, and adjust the fan speed accordingly.
MANUAL OPERATION
After you turn on the unit, you can switch
to manual operation by using the FAN
CONTROL button on the remote control or
the FAN SPEED button on the unit.
• 1, 2, 3, AND TURBO
Select your desired speed. The TURBO
level, the highest fan speed, can be
activated manually for maximum air
circulation.
• SLEEP MODE
Use the SPEED/MODE button on the
display or remote to manually turn
the light sensor on or off. With the
light sensor on, the unit will automatically
operate in Sleep mode when the room
is dark. When the room is light, the unit
will revert to its previous settings. Sleep
mode provides the lowest, quietest fan
setting and a dimmed display panel.

OPERATION

AIR QUALITY SENSOR
Air quality sensor shows elevated levels of
poor air quality. The green light indicates
acceptable levels, the orange light indicates
high levels, and the red light indicates poor
air quality. If the unit is set on Automatic
operation, it will adjust fan speeds to
compensate for increased or decreased
levels of air pollution.
Indoor Air Quality
7
PART IS
BLINKING
LOW (GREEN)
MEDIUM (ORANGE)
HIGH (RED)