Aim TTi TGF3162 Guia De Inicio Rapido página 11

Confirm the Duty Cycle
•
Press the soft-key labelled Duty - the current duty cycle appears in the edit box.
Note that the duty cycle is already set at 50%, but could be changed here if required.
Set the High and Low Levels
•
Press the soft-key labelled Ampl - the key label changes to HiLvl and the current high level
voltage appears in the edit box
Note that successive presses of the Ampl soft-key changes the Ampl and Offset key labels to
HiLvl (high level) and LoLvl (low level) and vice versa.
•
When the soft-key is labelled HiLvl - the current high level voltage appears in the edit box.
•
Use the numeric keypad to enter a new level. Press the numbers 3 . 3 .
Note that, as soon as a number is entered, the soft-keys change to show units of voltage.
•
Press the soft-key labelled V to confirm a high level of 3.3 volts.
•
Press the soft-key labelled LoLvl - the current low level voltage appears in the edit box.
•
Use the numeric keypad to enter a new level. Press 0 .
•
Press the soft-key labelled V to confirm a low level of 0.0 volts.
Turn the Output On
•
Press Output1 key to turn the channel 1 output On.
Note that the Output key illuminates in green to indicate the on state
Making live changes to any numeric parameter (e.g. Frequency)
Numeric parameters can be changed by using the cursor keys and spin wheel as an alternative to the
numeric keypad.
•
Press the hard key marked Square.
10