Aim TTi TGF3162 Guia De Inicio Rapido página 116

Specification
General specifications apply for the temperature range 5°C to 40°C. Accuracy specifications apply
for the temperature range 18°C to 28°C after 30 minutes warm−up, at maximum output into 50Ω.
Typical specifications are determined by design and are not guaranteed.
TGF3082 limits, where different, are shown in square brackets [ ] after the TGF3162 limits.
Waveforms
Standard Waveforms
Sine, Square, Ramp (Variable Symmetry), Triangle (50% Ramp symmetry), Positive Ramp (100%
Ramp symmetry), Negative Ramp (0% Ramp symmetry), Pulse, Noise (Gaussian), PRBS (only
available in TGF3082 with Option GU3082), DC, Sin(x)/x, Exponential Rise, Exponential Fall,
Logarithmic Rise, Logarithmic Fall, Haversine, Cardiac, Gaussian, Lorentz, D-Lorentz and 4 User
Defined Arbitrary Waveforms. Dozens of useful pre-built arbitrary waveforms are also supplied on
CD.
Sine
Frequency Range:
Frequency Resolution:
Output Level:
Amplitude Flatness
(1 Vp-p, relative to
10kHz):
Harmonic Distortion
(1Vp-p):
Total Harmonic Distortion
DC to 20kHz (Typical):
Non−Harmonic Spurii:
Phase Noise (10MHz,
1Vp-p, 10kHz offset):
Square
Frequency Range:
Frequency Resolution:
Output Level:
Duty Cycle
Rise and Fall Times
(Typical):
Aberrations (Typical):
Jitter (RMS):
1µHz to 160MHz [1µHz to 80MHz]
1µHz, 15 digits [14 digits]
≤ 50MHz
10mVp-p to 10Vp−p into 50Ω
≤ 100MHz
10mVp-p to 5Vp-p into 50Ω
≤ 160MHz
10mVp-p to 2.5Vp-p into 50Ω
≤10MHz
±0.1dB
≤100MHz
±0.2dB
≤160MHz
±0.6dB
≤ 10MHz
-65dBc
≤ 50MHz
-50dBc
≤ 80MHz
-40dBc
≤ 160MHz
-35dBc
0.05% [0.07%]
-65dBc
-113dBc/Hz
1µHz to 50MHz [1uHz to 25MHz]
1µHz, 14 digits
10mVp-p to 10Vp−p into 50Ω
0.001% to 99.999%, 0.001% resolution
5ns, Fixed [10ns, Fixed]
±5% of amplitude
<30ps (cycle to cycle)
115